windows-server-2012 – Windows Server 2012 – RDP over UDP无

我有一台 Windows Server 2012(不是R2)机器,托管在Hyper-V虚拟化中,具有RD Session Host&已安装RD网关.它用于运行桌面GIS应用程序.

WAN上的性能非常差.我将NAT端口添加到NAT以提高性能,但仍未使用UDP连接.

在局域网测试环境中(为了避免NAT /防火墙配置错误),我从Win10机器连接.连接信息栏显示“卓越的质量”,但没有提及有关UDP的任何内容.如果是反向连接(Windows Server => Windows 10),连接信息栏会显示已启用UDP.

我完全关闭了Windows Server上安装的Windows防火墙.我仔细检查了RD网关中是否启用了UDP传输.如果我使用Gateway(443 3391)或Direct(3389 3389)连接,则没有区别.我重新启动整台机器两次并滚动前三个谷歌结果页面中的所有链接.

你知道什么是错的吗？

1.5 Prerequisites/Preconditions

The protocol endpoints require UDP connectivity to be established.
The network path between the endpoints should allow the transfer of UDP datagrams in both directions.

The prerequisites for this protocol are identical to those for the UDP
protocol.

1.3.2.1

UDP Connection Initialization In this phase,both endpoints are initialized with mutually agreeable parameters for the connection. The terminal client initiates the connection by sending a SYN datagram. The terminal client also determines the mode of operation,RDP-UDP-R or RDP-UDP-L,as described in section 1.3.1. The terminal server responds with a datagram with the SYN flag set,along with an ACK flag,to acknowledge the receipt of the SYN datagram. The terminal client acknowledges the SYN datagram by sending an ACK. The terminal client can append the Coded Packets along with the ACK datagram. This datagram indicates that a connection has been set up and data can be exchanged. All datagrams in this phase – the SYN,SYN+ACK,and ACK – are delivered reliably by using persistent retransmits,irrespective of the mode that the transport is operating in.

（编辑：长春站长网）

【声明】本站内容均来自网络，其相关言论仅代表作者个人观点，不代表本站立场。若无意侵犯到您的权利，请及时与联系站长删除相关内容!